Dimplex BF39ST Service Manual download pdf (Page 5)

17.Flame/HeatOn/OffButton*

Press the 17.Flame/HeatOn/Off button to turn the Flame/

Heat function On. When the 2.SetTemperature is higher

then the 1.RoomTemperature the heat will come on. To

turn the heat off, lower the 2.SetTemperature so that it’s

setting is lower then the 1.RoomTemperature. The default

temperature setting is 72°F (22°C).

NOTE:When using the remote control the heater runs

on a thermostat. Press the 8.TemperatureUp or 7.

TemperatureDown button to adjust the set temperature.

Once the desired set temperature is reached the heater

will turn Off. The heater will cycle On and Off to maintain

the desired set temperature.

ChildLock(Figure 4)

1. Depress tab on the battery cover on the back of the

remote transmitter and remove the battery cover.

2. Move Child Lock tab to the right to lock the remote

transmitter.

3. Move Child Lock tab back to the left to unlock the remote

transmitter.

4. Replace the battery cover.

NOTE:To temporarily unlock the remote transmitter

press (in order) 7.TemperatureDown then 8.

TemperatureUp then 9.DimmerDown.

When the remote transmitter’s backlight is illuminated the

Child Lock is bypassed. When the backlight is off the Child

Lock is re-activated.

Unlocked Locked

Child Lock Switch

Child

Lock

Figure 4

1 2 3 4 5 6 7 8 9 10 ... 13 14

No comments

Dimplex BF39ST Service Manual Page 5