A Class Air Source Heat Pump User Guide IMPORTANT – THIS MANUAL MUST BE LEFT WITH THE USER AFTER INSTALLATION 8/60476/0 Issue 1.03
8 The icons will be highlighted in green if that part of the system is on and white if it is off. Some of the symbols displayed
9 4.6 Temporary modes A number of temporary modes can be set which override the running mode settings, as shown in figure 17. This can be used, for ex
10 5 Safety • Installation and any service work on the heat pump may only be performed by authorised and qualified installer and after-s
11
ii Contents 1: Introduction 1 2: How the Heat Pump Works 1 2.1 Tips and advice to follow when using
1 1 Introduction Thank you for choosing a Dimplex Heat Pump. Dimplex A-Class is designed specifically to maximise year-round heating syst
2 3 Heating System Controller (User Interface) The controller/user interface that is supplied with the Dimplex A-Class heat pump is used as a
3 4.2 Home screen The home screen, as shown in figure 5, is accessed by pressing confirm from the temperature screensaver. Example - at
4 Example: • Room temperature is 21°C • Heater is on • TIMER mode selected • Option 1 time period is selected • At 9.35am the zone temperature w
5 4.3.2 Operating modes Clicking on the clock icon allows you to select from one of three running modes: TIMER mode activates the pre-set
6 Pre-set time periods A number of time period have been pre-set to typical heating time periods, to aid in quick and easy initial s
7 Figure 15: Setting disinfection frequency and time Boost: When using TIMER mode, you may want to use DHW before the next scheduled period, for
Comments to this Manuals