Dimplex Chesford CSD20 Service Manual download pdf (Page 13)

screwdriver, release the two (2) black wires from the

Terminal Block (turn the screws of the Terminal Block

counter-clockwise) which lead from the Power Cord.

Take note of their original positions.

8. Use pliers to squeeze the portion of the Cable Clamp

(Figure 17) that sits on the inside of the Access Panel

and push cord and clamp through the panel.

9. Release the cord from the clamp.

10. Feed replacement Power Cord through the hole in the

Access Panel and connect the two (2) ends of the Power

Cord to the Terminal Block.

The smooth edged side of the Power Cord leads from the

narrow blade of the plug and will connect to the terminal

opposite to the black wire from within the rebox. The

side of the Power Cord with ridges leads from the wide

blade of the plug and connects to the terminal opposite

the blue wire from the rebox.

11. Afx the Cable Clamp to the Power Cord close to the

Access Panel and push clamp and cable through the

Access Panel to secure in place.

12. Reattach Access Panel to chassis using the two (2)

screws removed in step 2.

13. Follow steps 1 through 3 in reverse order to reassemble

replace.

Figure 17

Blue wire

leading

from

rebox

Black

wire

leading

from

rebox

Terminal Block

Cable Clamp

Wire with smooth

edges leads to

narrow blade of

plug

Wire with ridges

on edge leads to

wide blade of plug

1 2 ... 8 9 10 11 12 13

Comments to this Manuals

No comments

Dimplex Chesford CSD20 Service Manual Page 13

Comments to this Manuals

Related products and manuals for Fireplaces Dimplex Chesford CSD20