Dimplex SOLAR ST0133 Installation Manual download pdf (Page 18)

SOLC220 – Integrated roof kit

Page 18 of 28

RK0089-4 08/09

SOLAR

Step: 16.0

The collector(s) can now be installed.

See chapter 2 for information on the

collector connections, it is critical the

collectors are orientated correctly.

- Rest the collectors on the bottom

brackets as highlighted in the image

across.

The collectors can now only move left to

right.

There are markings on the aluminium

sheets that highlight the approximate

position of the collector.

For exact location of the collectors:

- The gap between the frames of the

collectors must be 90mm and 45mm

from the centre of the rubber seal to

the frame of the collector, as illus-

trated across.

90mm

45mm

Step 17.0

To connect the inlet/outlet connections

to the collectors:

- Drill a 30mm diameter hole in the

aluminium sheets at the location of

the flow and return pipes.

A conical drill bit or a standard drill may

be used for this.

- The hole centre is to be positioned

50mm from the frame of the collector

and in line with the collector connec-

tion, as illustrated across.

- It is important that any swarf or

burred edges be removed.

50mm

ø30mm

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

No comments

Dimplex SOLAR ST0133 Installation Manual Page 18