Dimplex SOLAR ST0133 Installation Manual download pdf (Page 16)

SOLC220 – Integrated roof kit

Page 16 of 28

RK0089-4 08/09

SOLAR

Step: 14.0

The top right sheet can now be in-

stalled, it is important to keep note of:

- The overlap between top and bot-

tom sheets, see step 11.0.

- The folds are butted against one

another as shown in A across.

- Ensure where the top RHS overlaps

the middle sheet, the tape is se-

cured properly. Use silicone to

achieve a watertight seal if neces-

sary.

- Use fixing kit 1.2, 1.4 or 1.6 to se-

cure the brackets to the lath.

Step: 13.0

Align leg of

bracket to edge

of the tape

Align back

face to outer

e of ta

Remove tape

backing

- Remove the backing from the tape and

install the top brackets.

(These brackets can be indentified by

the hank bushes assembled on to the

inside face and also the label on the

bracket highlights its position on the

assembly).

- Align the back face of the bracket with

the tape and the leg of the bracket

along the side of the tape.

- Use fixing kit 1.2, 1.4 or 1.6 (self drill-

ing hex head screws and washers) to

secure the brackets to the laths be-

neath.

- Remove the tape backing on the top

corner of the sheet.

For a 2m² kit skip to step 17.0, for a

4m² kit skip to step 15.0.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Comments to this Manuals

No comments

Dimplex SOLAR ST0133 Installation Manual Page 16

Comments to this Manuals

Related products and manuals for Unknown Dimplex SOLAR ST0133