Dimplex SP420 User Manual download pdf

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE.

Dimensions

(millimetres)

Installation and Operating Instructions

Electrical

08/18887/1 Issue 1

Fig. 1

Important Safety Advice:

When using electrical appliances, basic

precautions should be followed to reduce the risk

of fire, electric shock, and injury to persons,

including the following :

• If the appliance is damaged, check

immediately with the supplier before

installation and operation.

• This heater must not be used if the front glass

is damaged.

• Do not use this heater in the immediate

surroundings of a bath, shower or swimming

pool.

• Do not use outdoors.

• This heater must not be located immediately

above or below a fixed socket outlet or

connection box.

• Do not cover - Overheating will result if the

heater is accidentally covered.

• In the event of a fault unplug the heater.

• Unplug the heater when not required for long

periods.

• Although this heater complies with safety

standards, we do not recommend its use on

deep pile carpets or on long hair type of rugs.

• Do not leave young children, the elderly, or

the infirm unsupervised in the vicinity of the

heater.

• The appliance must be positioned so that the

plug is accessible.

• If the supply cord is damaged it must be

replaced by the manufacturer or service agent

or similarly qualified person in order to avoid

a hazard.

WARNING – THIS APPLIANCE MUST BE EARTHED

This heater must be used on an AC ~ supply only and the

voltage marked on the heater must correspond to the supply

voltage.

Do not switch the appliance on until properly installed. Please

read all the safety warnings and operating instructions.

Unpack the heater carefully and retain the packaging for pos-

sible future use, in the event of moving or returning the fire to

your supplier.

Contents of Carton.

• SP4 Heater.

• Wall fixing bracket.

• Six fixing screws and six wall plugs.

• Remote control and batteries ( 3 AAA’s type).

• Spare bulb.

Do not connect the heater to an electricity supply until it is

installed on a wall correctly. - see ‘Installation’.

When in operation there is a 300 watt heat output from the

fuel effect, and an additional 120 watt output when the heated

glass panel is in operation.

The heater can be used remotely or manually. - see ‘Opera-

tion’.

General features of remote control are:

• Activate/Deactivate heated glass panel.

• The illumination of fuel effect can be increased or

decreased.

• Programmable timer.

Please note: Used in an environment where background noise

is very low, it may be possible to hear the motor which oper-

ates the flame effect. This is normal and should not be a cause

for concern.

General

Wall Fire SP4

Model No: SP420

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Model No: SP420

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE. Dimensions(millimetres)Installation and Operating InstructionsElectric

Page 2 - Installation

85662406001158558480outline of wallfixing bracketwallplugsscrewswallfixingbracketInstallationRecommended Fixing Dimensions - Fig. 2Fig. 3Fig. 4Fig. 5

Page 3 - Manual Operation

Manual OperationThe Standby Switch (Switch 1) must be first turned ‘ON’ andthe AUTO/MAN (Switch 2) switch set to ‘MANUAL’ to operatethe manual control

Page 4 - Remote Control Operation

Remote Control OperationLCD displayThe LCD display shows the following functions:• Main menu points: OFF, FLAME, HEAT, TEMP, TIMER,PROG, and TIME.• Br

Page 5 - General information

Replacing the remote controlThe new remote control must be set up as follows:Press switch 1 to ON .Press switch 2 to AUTO (see Fig. 6).Press switch 3

Page 6 - Lamp Replacement

The front surround will need to be removed in order to changelamps.Warning -The front surround is heavy and easily damaged !.The front surround is fix

Page 7 - Cleaning

CleaningWARNING – ALWAYS DISCONNECT FROM THE POWERSUPPLY BEFORE CLEANING THE HEATER.For general cleaning use a soft clean duster – never useabrasive c

Page 8 - [c] Glen Dimplex UK Limited

The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility(EMC) EN55014, EN60555-2