Dimplex DFB8842 Owner's Manual download pdf (Page 13)

13

Operation

Purire™ function off.

H. Flame & Heat On/Off Button

Press the H button to turn the

Flame/Heat function on. When

B is higher then A the heat will

come on. To turn the heat off,

lower the B so that it’s setting is

lower then the A. The default tem-

perature setting is 72°F (22°C).

!

NOTE: When using the

remote control the heater runs

on a thermostat. Press the

J or I buttons to adjust the

set temperature. Once the

desired set temperature is

reached the heater will turn off.

The heater will cycle on and

off to maintain the desired set

temperature.

Disable Heat

If desired, depending on the sea-

son, the heater on the unit can be

disabled. The unit will operate in

the same fashion, with remainder

of the controls.

To Disable - Press J and O at the

same time. The temperature

setting on the remote will no

longer be visible.

!

NOTE: The heat will not work

in manual controls either.

To Enable - Press J and Q at the

same time. The temperature

setting will now be visible

again.

Child Lock (Figure 6)

1. Depress tab on the battery

cover on the back of the re-

mote control and remove the

battery cover.

2. Move Child Lock tab to the

right to lock the remote control.

3. Move Child Lock tab back to

the left to unlock the remote

control.

4. Replace the battery cover.

!

NOTE: To temporarily unlock

the remote control press (in

order) I then J then K.

When the remote control’s back-

light is illuminated the Child Lock

is bypassed. When the backlight

is off the Child Lock is re-activat-

ed.

Figure 6

Unlocked

Locked

Child Lock

Switch

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Comments to this Manuals

No comments