Dimplex CX-MPC Owner's Manual download pdf (Page 17)

17

Maintenance

The only maintenance required is

the replacement of the batteries.

When the batteries start to reach

the end of their life the controller

will display a low battery icon,

, above the temperature

reading. In conjunction with this

a periodic beep (every 2 minutes)

will be emitted from the unit until

the battery is changed.

To change the battery:

Remove unit from wall.1.

Slide battery cover open on 2.

the controller.

Remove and replace two (2) 3.

AA batteries, into the battery

holder.

!

NOTE: The day and time will

have to be reset once the bat-

teries have been replaced, but

the program will remain in the

memory.

Replace cover.4.

Remount on wall.5.

Battery must be recycled

or disposed of properly.

Check with your Local

Authority or Retailer for recycling

advice in your area.

Battery Cover

Batteries

Surface Cleaning

Use a cloth dampened with warm

water only to clean housing and

glass display of the wall setter. Do

not use abrasive cleaners.

If the display needs to be cleaned,

putting the unit in the lock func-

tion will allow you to remove any

fingerprints or dirt without chang-

ing any settings.

Figure 4

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Comments to this Manuals

No comments