Dimplex VFMQ 30 Specifications download pdf (Page 5)

7211270100 Rev03 5

Wiring the RTEV99 Internal Thermostat

As per the RTEV99 Instructions, fasten the sensor probe assembly by the supplied screws on

the base next to the fan. There are four wires:

• The white wire marked LE is wired into lower terminal block #7.

• The white wire marked LH is wired into lower terminal block #10.

• The two wires crimped together are wired to the lower terminal block #8 and jumpered to the

upper terminal block #5 / N.

• The brown wire marked L is pre-wired to a 2-pole terminal block at #12. This terminal block

is to be connected to the pre-drilled holes under the main terminal block and then wired to

upper terminal block #2 – L1 to complete the circuit.

Wiring by installer

- - - - Pre Wired

1 2 3 4 5 6 7 8 9 10 ... 13 14

No comments

Dimplex VFMQ 30 Specifications Page 5