Dimplex WB5E 1 User Manual

AUTO-FILL WATER BOILERS INSTRUCTION MANUAL MODELS COVERED WB3 WB7 WB15 WB5E 1

10 DE-SCALING All models except WB5E To de-scale your machine, first disconnect the machine from the power supply. Remove the case by removing th

11Clean the level sensing probes and their white holders completely using a clean non-metallic scourer. Ensure all traces of de-scaler are removed b

12SERVICE WARNING LIGHT (All Models except WB5E) All models except WB5E have this facility. This light is designed to help you discover the cause of

13fallen to a point at which the heating element(s) could be damaged. If in order call service department on 01704 502911 Quoting the Serial Number

2 IMPORTANT HEALTH AND SAFETY INFORMATION PLEASE READ BEFORE USING YOUR NEW WATER BOILER Your new water boiler is designed to provide a constant

3 INTRODUCTION Your new water boiler is designed to give years of trouble free service provided that the instructions contained in this manual are f

4 WARNING: THIS APPLIANCE MUST BE EARTHED REAR ENTRY OF CABLE Fixed or flexible cable to be connected direct to the terminal block, cable gland no

5 BOTTOM ENTRY Connect to a suitable cold drinking water supply using 15mm copper pipe and push on the ‘T’ piece supplied. The ‘T’ has been blanked

6 OVERFLOW PIPE REAR ENTRY In your fitting kit you will find a straight push on connector with a small length of 15mm copper tube pushed into it. I

7 OPERATION (All models except WB5E) After the electrical and water connections have been made, switch the power and water supply on. The power and

8 OPERATION (WB5Eonly) After the electrical and water connections have been made, switch the power and water supply on. When the power supply is sw

9 TECHNICAL SPECIFICATION ALL MODELS Tank constructed in stainless steel. Tank insulated from outer casing with high temperature polystyrene. All