Dimplex SOLAR ST0133 Service Manual download pdf (Page 10)

SOLC220 - Free standing kit

Page 10 of 20

ST0117 – C 08/09

SOLAR

6 Installation

Step 1.1 Fixing

- Determine the dimensions of the whole

collector array and mark the position of

the U-pieces (3.1).

- Distance A applies to the spacing be-

tween the U-pieces of the basic kit, dis-

tance D to all extension kits.

- Dimension B relates to the distance

between the U-pieces of adjacent col-

lectors.

- Dimension C is fixed at 1140mm.

- The measurements relate to the middle

of the U-piece components.

- It is important to remember when in-

stalling the collectors, they must be in-

stalled from left to right only, (when

facing the array from surface exposed

to the sun).

Step 1.2 Fixing

- Before drilling the holes in the surface

for the U-pieces, check the spacing

using the diagonals.

- Diagonals E and F must be of equal

length, as must diagonals G an H.

- Next, drill with the ø10 mm drill bit at

the marked positions.

- If drilling is not permitted on a flat

roof due to the leak-tightness of the

roof, appropriate concrete slabs or a

similar material must be used as a

foundation.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments