OPERATING INSTRUCTIONS
SAFETY INSTRUCTIONS
1. Ventilate rooms well during commissioning
2. Do not move the heater in any way once installed
without the services of a competent electrician.
3. Do not cover the heater with clothing etc. at any time or
position furniture close to or against the heater.
4. Ensure a clearance of at least 150mm between heaters
and curtains.
ALSO REFER TO COVER PAGE
AUTOMATIC OPERATION
Dimplex XL6N and XLS6N Storage Heaters store heat
overnight using cheap off peak electricity and discharge this
heat the following day. The XL6N is preset at the factory to
always take a full charge. XLS6N models are fitted with an
external sensor which measures room temperature and adjusts
the input to the heater automatically, thus ensuring the most
effective use of electricity. These operating instructions assume
that the correct size of storage heaters have been selected to
cater for the heating requirements of the room.
CLEANING
To maintain the appearance of the heater wipe occasionally
with a dry cloth when the heater is cool.
Do not use abrasive powders of furniture polish.
AFTER SALES SERVICE
Your Dimplex Storage Heater is guaranteed for one year from
date of purchase. We undertake to exchange or repair within
the period, any part found to be defective due to a
manufacturing fault (applies in the UK only). This guarantee
in no way prejudices your rights under common law.
Should you require after sales service, please get in touch
with the supplier through whom you purchased the appliance,
or your nearest Service Agent.
Please do not return a faulty appliance or part of an appliance
to us as this may result in transit damage and/or delay in
providing service. Let us know your difficulty quoting the model
number and serial number of the appliance. We will then take
the appropriate action.
This appliance complies with the European Standards EN 60 335-1, EN 60 335-2-61, EN 61000-3-2,
EN 61000-3-3, EN 55014 and EN55104 for Safety & Electromagnetic Compatibility.
These standards cover the requirements of the EMC Directives 89/336 & 73/23.
Customer Help Line 0870 7270 101
Product Sales 0870 7270 103
Head Office 0870 0777 117
Glen Dimplex (UK) Ltd Millbrook House
Grange Drive
Hedge End
Southampton
Hampshire
SO30 2DF
83708 Issue 3 : February 2002
Thermal overload protection
This appliance is protected by a
thermal safety cutout which will
operate to isolate the electricity
supply if, for example, the heater
surfaces or grille are obstructed
to cause overheating.
The cutout should not operate if
the instructions given in this
leaflet and clearances regarding
positioning are strictly followed.
However, if the cutout has
operated before following the
instructions below determine
the cause of the cutout
operating. If the heater has not
obviously or inadvertently been
misused - e.g. covered - it will
be necessary to have the
appliance fully checked by a
Dimplex Service Agent. (A list
of Dimplex Service Agents is
enclosed in the leaflet envelope
and should be retained by the
user).
(8 pages)
(4 pages)
(10 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals