Dimplex QM070 QM100 QM125 QM150 Operations Instructions download pdf (Page 7)

- 7 -

Control Functions

The heater controls can easily be adjusted by using a

combination of the three buttons and the selector dial,

which can be rotated and pressed.

1. The DISPLAY SCREEN shows the options available

at each stage of the adjustment.

2. MENU displays the options available;

Date / Time - Setting today’s date / time.

Timer Mode - Setting the timer to your individual

requirements.

Display - Adjustment of screen brightness and

contrast.

Options - Time formats and ‘Daylight Saving’

settings.

3. BACK shows previous programming stage.

4. ADVANCE overrides the time settings and activates

the heater, which will remain ON until the next OFF

period is due, or OFF until the next ON period is due.

At the same time if the stored energy is low then the

boost will activate for a maximum period of 120 minutes

(2 hours), or until the room temperature target is reached

(temperature shown on the Display Screen).

To deactivate press ADVANCE a second time.

5. SELECTOR DIAL can be turned clockwise and anti-

clockwise and enables the required room temperature to

be adjusted. The screen colour changes for warmer and

cooler settings, showing deep blue through to bright red.

To check what setting the heater is currently using

press the selector dial once and the timer mode will be

displayed e.g. ‘Out All Day’.

The selector dial is also used in combination with the

menu button to select and conﬁ rm your settings.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Dimplex QM070 QM100 QM125 QM150 Operations Instructions Page 7