Dimplex PUH1500 Owner's Manual download pdf (Page 4)

cause a risk of re. If you must use an extension cord, the cord must be

No. 14 AWG minimum size and rated no less than 1875 Watts.

14. Always use properly grounded, fused and polarized outlets.

15. Disconnect all power supply before performing any cleaning, maintenance

or relocation of the unit.

16. When transporting or storing the unit and cord, keep in a dry place, free

from excessive vibration and store so as to avoid damage.

SAVE THESE INSTRUCTIONS

NOTE: Procedures and techniques that are considered important

enough to emphasize.

CAUTION: Procedures and techniques which, if not carefully

followed, will result in damage to the equipment.

WARNING: Procedures and techniques which, if not carefully

followed, will expose the user to the risk of re, serious injury,

illness or death.

Unpacking and Assembly

Unpacking

Unpack the Electric Umbrella Heater making sure that all the items are

present and that there are no components left in the box and that the

heater head is free from any packing material.

Using the detailed drawings, follow the steps to assemble your heater.

NOTE: Do not connect the Electric Umbrella Heater to the

electrical supply until all the assembly is complete.

WARNING: Do not connect the heater to the electrical supply if

any of the components or the power cord is damaged in any way. If

in doubt contact Dimplex Customer Service.

Assembly

1. Remove the heater brace (Mounting Part B - Figure 1) from the

heater body by sliding it straight down as shown in Figure 2-A.

2. Place the Mounting Part A (Figure 1) onto a pole which has a

1 2 3 4 5 6 7 8 9 10

No comments

Dimplex PUH1500 Owner's Manual Page 4