Dimplex EMC4240 Use and Care Manual download pdf (Page 5)

Grounding Instructions

This heater is for use on 240 Volts.

The cord has a plug as shown on

Figure 1. No adapter should be

used with this unit. The type outlet

is a 240 Volt grounding outlet. When

properlyinstalled,itprovidesaground

connection through the cord to the

heater to protect the operation from

electric shock.

Heater Location And

Clearances

The heater is intended for use

locatedonahardoor,tabletop,

desk or on shelf, and the like.

The discharge air should wipe the

walls without blowing directly on

them (Figure 2).

Ensure the air discharge is

parallel to or away from walls.

NOTE:Topreventpersonal

 injuryalwaysusealicensed

electrician to install new

outlets or circuits.

CAUTION: When turning and/or tilting the heater do not block the

exhaust opening.

Use Of Support Stand (EMC4240 only)

Thepre-installedsupportstandcanbeswivelledouttoallowan

upward angle for the air discharge. When in down position, the heater

shouldbeplacedonaatsurfacesuchthatitwillbestableandnotfall

over(Figure3).

Outside Wall

Discharge

Figure 2

Figure 1:

Plug and outlet

congurationfor240

Volt, 30 Amp circuit

Ground

Plug

Outlet

1 2 3 4 5 6 7

No comments

Dimplex EMC4240 Use and Care Manual Page 5