Dimplex DF3215 Service Manual download pdf (Page 3)

DF3215

OPERATION

ELECTRIC FIREPLACE MANUAL CONTROL

The manual controls for the fireplace are located in the upper right hand corner.

A. Main On/Off Switch

Supplies power to the 3 position manual control switch.

B. 3 Position Manual Control Switch

Position 1 (left position): The unit is operated with the remote control.

Position 2 (center position): The flame effect is turned ON.

Position 3 (right position): The flame effect and heater are turned ON simultaneously.

When the manual control is in Position 3 the heater does not run on the remote

operated thermostat. When the heater is ON the red indicator light is activated on the

firebox and the fan and heater are running on low.

NOTE

When the manual control is in positions 2 and 3, the fireplace unit will not operate with

the remote control.

RESETTING THE TEMPERATURE CUTOFF SWITCH

Should the heater overheat, an automatic switch will turn the heater off and it will not

come back on without being reset. The temperature cutoff switch can be reset by

unplugging the unit, waiting 5 minutes and plugging the unit back in.

CAUTION

If you need to continuously reset the heater, unplug the unit and call Dimplex North

America Limited at 1-800-668-6663 and press 4 for technical support.

FIGURE 1

Indicator

Light

Initialization

Button

3 Position

Manual

Control

Main

On/Off

Switch

SERIAL No.

XXX XX

1 2 3 4 5 6 7 8 ... 18 19

No comments

Dimplex DF3215 Service Manual Page 3